Final Assembly - Murray 20456X9A Instruction Book

Table of Contents

Advertisement

PREPARATION
HOW TO MOUNT THE GRASS BAG
1.
To mount the grass bag on the mower,
rsisethe rear door. Hold the handle ofthe
grass bag. Put the grass bag In the
opera_ing position (Figure 12). Lower the
rear door.
IMPORTANT:. Make surethe hooks, on each
side of the frame assembly, are mounted
on the pivot rod.
A
WARNING: Do not use the grass
bag unless the cover Is In the op-
orating postlon.
Handle
Rear Door
Mount Frame
Hooks To Pivot Rod
Rgme12
HOWTO EMPTYTHE GRASS BAG
WARNING: Before you remove
_hk
the grass bag, mp the engine.
Before you remove any grass
from
the
mower
housing,
disconnect the wire from the
spark plug.
1. Holdthe rear door. P_se the rear door to
a vertlcstposltlou(Figure 12),
2. Lift the frame assembly over the two
handlenotches.
3. Openthe top cover (Figure 13).Emptythe
grassfromthe grass bag.
4. Tomountthe gross bagonthe mower,see
"HowTo MountThe Grass Bag'.
Grass Bag
" TOPCover
Figure13
FINAL ASSEMBLY
Before you use the mower, check the
assemblyof the wheels, the handle, endthe
F- 08525
controls. M ake sure allthe fastenersaretight.
Make sure the throttle co_b'olandthe engine
stoplever workcorrectly.
15

Advertisement

Table of Contents
loading

Table of Contents