Magnavox VRU364AT Owner's Manual page 40

40
Other Hookups (cont'd)
With a Converter/Descrambler Box
Cable Converter Box
'\ ANT(enna). Back of TV
IN(put) Jack .-" .-_
[ I
!
o L o OUT(put)
I Ii
Cable Input y Jack ,
• Combination
With this connection, you can record and view
any channel, including scrambled channels.
Antenna Jack
However, channel selections must be made at
the cable converter box. This means that:
O
You can record any channel by using your
remote control to select channels at the cable
converter box (see "Cable Converter Box
Code Setting" on page 34).
Timer recordings are programmed differ-
ently than shown on pages 20 - 25.
• You can only program a timer recording
for one channel at a time.
• When you are prompted to enter the
channel you want to record, select chan-
nel 3 or 4 (whichever is the output
channel of your cable converter box).
• Set your cable converter box to the
channel you want to record.
• Leave the cable converter box on while
you are recording.
• You cannot view a channel other than the
one you are recording (the instructions on
page 18 do not work with this hookup).
• You cannot program channels with this
hookup (as discussed on pages 7 and 27).
Recording and Viewing a Scrambled
or Unscrambled Channel
With the VCR on and in VCR position, use the CHANNEL
(Up/Down) buttons to set the VCR to the output channel of
the cable converter box (channel 3 or 4).
2
Set the TV to the same channel to which you set the VCR.
3
Select the channel you want to record at the cable converter
box.
Watching TV With the VCR Off
1
Use the TV channel selector to set the TV to the same channel
as the output channel of the cable converter box.
Use the cable converter box channel selector to select the
channel you want to watch.
• ••to•o• •• •o•••o• •• ••or• •• •• o• • • • •••• •••o• •1 •• •lit i • • •o• • •oo o• i o•
To program a timer recording with this hookup, see "Timer
recordings are programmed differently. " above left.
The cable converter box must be on during recording.