Table of Contents
Advertisement
35
MTS
Broadcast
Stereo
System
Your VCR cal_ play recordings
broadcast
in Hi-Fi (high fidelity)
stereo, which produces
a crisp, clear sound from two sources.
Your VCR also can play tapes recorded
in a second audio (usually,
that means your program
is recorded
in a second
language).
Of course, your VCR will play tapes recorded
in monaural
(single-source)
sound as well.
Your VCR also will record
in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo
or second
audio.
If you play back the tape on a VCR that can't play back tapes in stereo or second audio, the VCR will automat-
ically play the tape in monaural
sound.
Read the directions on this page to familiarize yourself with your VCR's stereo and second audio setups. Then follow the direc-
tions on page 36 to record in stereo or second audio and the directions on page 37 to record in Hi-Fi stereo,
Understanding On-Screen Displays
When you receive a signal from a channel you're
watching,
one of the display screens
shown below will appear when you press
the STATUS/EXIT
button
on the remote
control.
The indication
2ND AUD or TV STEREO
that appears
on this side of the status display
tells you if your VCR is programmed
to
receive a second
audio or stereo broadcast
(it cannot be programmed
to receive both at
the same time).
I
/ v0P
TV STEREO
SLP
\
12:00AM
CH 02
STEREO
2ND AUD
1:23:45
HIFI
J
raThe
indication
2ND A UD or STEREO
that
appears
on this side of the status display tells
you if the program
you're
watching
can be
received
in second
audio or stereo.
This indication
is not available
during
tape
playback.
Specifically...
'_STOP
12:00AM'_"_
TV STEREO
CH 02
___
STEREO /
2NDAUD /
,,SLP
1:23:45
HIFI/
//When
a program broadcast in stereo can be received, STEREO appears here.
When a program broadcast in second audio can be received, 2ND AUD appears here.
-When
a program
broadcast
both in stereo and second audio can be received,
both STEREO
and
-2ND
AUD appeal" here.
NOTE: Although
a program
may be broadcast
in both stereo and second audio, you cannot
record in both stereo and second
audio at the same time.
Receiving and Recording in Stereo or Second Audio
Receiving and Recording in Stereo
/'STOP
12:00AM_
TV STEREO
CH02
STEREO
i
o receive
and record in stereo, press the MENU
button on your remote control.
Then press the
Number
3 button to select TUNER
SET UE
Now, press the Number
6 button
to select TV
STEREO.
Press the STATUS/EXIT
button to exit.
When you press the STATUS/EXIT
button on
your remote
control, TV STEREO
will appear in the upper left corner of the TV screen.
\SLP
1:23:45
HIFIj
Receiving and Recording in Second Audio
_OP
12:00AM"_
2ND AUD
CH 02
2ND AUD
SLP
1:23:45
HIFI
J
To receive
and record in second audio, press the MENU
button
on your remote
control.
Then
press the Number
3 button
to select TUNER
SET UP. Now, press the Number
7 button to select
2Iq13 AUDIO.
Press the STATUS/EXIT
button to exit. When you press the STATUS!EXIT
but-
ton on your remote control, 2ND AUD will appear in the upper left corner of the T'V screen.
Advertisement
Table of Contents
