Dvd Language S Etting - Magnavox CD130MW9 Owner's Manual

Ifyoumake s etting f or"TV MODE" or"DOLBY DIGITAL';
you can also enter from the
"QUICK" menu.
In stop mode, press [SET-UP] to display the "SETUP"
menu first, then use [Cursor A/V] to select"QUICK"
and press [ENTER].
Use [Cursor AIr] to select the desired item, then press
[ENTER].
[AUDIO] "1, *2 (Default: ORIGINAL)
Select the desired audio language.
or
[SUBTITLE]"1, *2 (Default: OFF)
Select the desired subtitle language.
[] DVD Language Setting
You can change the desired language when playing back the disc.
1 In stop mode, press [SET-UP] to display the"SETUP"
menu.
SET-UP
2 Use [Cursor AIr] to select"CUSTOM", then press
[ENTER].
or
3 Use [Cursor AIr] to select"LANGUAGE", then press
[ENTER].
or
_ Use [Cursor AITI to select the desired item, then press
[ENTERI.
or
or
[DISC MENU] "1 (Default: ENGLISH)
Select the desired language in disc menu.
or
Note:
• To change the on-screen language, press [SELECT] to
switch the unit to TV mode first. Press [SET-UP] to display
"TV SETUP" menu, then set the desired language. (Refer to
"Language Selection"on page 12.)
• Language options are not available with some discs.
• If"OTHER" is selected in 'AUDIO" "SUBTITLE" or "DISC MENU"
menu, press 4-digit number to enter the code for the desired
language. (Refer to "Language Code List"on page 37.)
• Only the languages supported by the disc can be selected.
_2
• Use [MODE] to select audio and subtitles available on the
DVD.
• If the DVD's default settings for audio and subtitle are the
same language, the subtitles may not show unless you turn
them on.
6 Press [SET-UP] to exit.
SET-UP
EN