Advertisement
ave you ever played hide and
eek with your remote
control? Are you tired of tearing
tlTe house apart trying to find if
someone has stuffed the remote
under the couch, put it on the
shelves, or hid it in the desk? Well,
your TV remote can save you all
that looking by automatically
signaling its location to you.
ttere's how it works:
( _.
Press the POWER
button on
l_the set to turn the TV ON.
Note: Normally you can press any
button on the front of the TV to
turn the set ON. But for the remote
Iocator to work you need to be sure
to use the Power button at the TV.
A "locating remote" message
,.;hows on the TV screen.
_,_
Within a few seconds a
chirping or beeping sound will
begin to come from the remote
control hand unit.
The remote will continue to signal
its location for around 30 seconds.
Normal TV program sound will not
be heard while the remote locator is
working.
_,,,_
Once you find the remote just
press any button on the remote and
the beeping sound will stop.
The remote is nowq'eady for
normal TV feature use.
Remember, the remote
Iocator may not properly
receive its 'laoming" signal from
the TV if it has been placed on a
metal shelf or counter material.
Also, since there's a special type
of radio frequency "homing"
signal receiver inside the remote
we are required to notify you that
any changes or modifications not
expressly approved by Philips
Consumer Electronics Company
could void the user's authority to
operate the remote equipment.
Your TV is attempting
to locate a lost remote
Remote
Locator
"homin
range
is around
30 Feet.
STR
[]
30
Advertisement
