Advertisement
Z_Y adding optional external
I,LJ speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
Connect both external
speakers
to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
_-._
Place the speakers
so the
viewing
area is between
the TV
and the rear surround
speakers.
(See overhead
view drawing.)
<_3_
Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (v") position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
REAR SURROUND
SOUND
SPEAKER TERMINALS
®®
BACK OF TV
REAR SURROUND
SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be beard at the same volume level as the front TV
speakers. It is intended for the rear speakers to give
a background
noise effect which requires a lower
volume level than the 1N"s front speakers.
Remember,
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
control is turned
ON - see page 22).
REAR SPEAKER
REAR SPEAY
PRIMARY
VIEWING AREA
_ja e TV's Variable Audio Output
cks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speagers can be used for
the playback of Surround Sound.
<_
Connect the R(ight) and L(eft)
VARIABLE
AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
..-G'-.
€_,,,,_ Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(v*') position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
@
BACK
OF "IV
AUDIO
:
INPUT JACKS
VARIABLE
AUDIO
OUTPUT JACKS
AUDIO SYSTEM
SPEAKERS
USED AS REAR
SURROUND
SOUND SPEAKERS
24
Advertisement
