Advertisement
I
th the use of an optional Dolby
urround Prologic Amplifier you
can receive the added sound
dimension found only in Dolby
Surround programs. Dolby Surround
combines wide left-to-right stereo
separation with solid center channel
imaging, complemented by a front-to-
back soundfield effect. The result for
you the listener is to create a movie
theater or concert hall "you are there"
sound sensation.
<_/_
Connect the FIXED Audio
v
Output jacks on the TV to the AUX
INPUT jacks on a Dolby Prologic
Audio Amplifier system.
<_/2"_ Connect the CENTER
v
I
HANNEL Input jack on the TV to
the CENTER PRE-AMP jack on the
Dolby Prologic Amplifier.
<_/3"_ Connect the rear set of Surround
V
Sound speakers to the (+,-)
connections on the Dolby Surround
Amplifier.
Place the Audio System's Front and
Rear Surround speakers as shown in
the picture on this page.
<,_
Turn the TV ON. Set TV Volume tc
normal listening level. Place the TV's
TV SPEAKERS (Sound Menu 2 of 3)
control to "CENTER CHANNEL
INPUT".
Turn the Dolby Prologic Amplifier
ON. Place its SURROUND
MODE
control to the l_olby Prologic mode.
<,_
The full effect of DOLBY
] SURRQUND programs (either
broadcast, VCR, or VDP) can now be
heard through the TV and Amplifier
system speakers.
Remember. R(ight)/L(eft)
channel stereo sound and rear
Surround sound will be heard from the
external (or Dolby Prologic Amplifier
system) speakers. The TV's front
cabinet speakers are used for true
Center Channel sound necessary to
complete the Dolby Prologic Surround
arrangement.
You will need the following to set-up and use the designed
SURROUND
SOUND system shown below:
One set of rear Surround Sound speakers
One Dolby Prologic Audio Amplifier (with Center Pre-Amp
Output and twin speakers)
One DOLBY SURROUND
encoded source (either playback -
VCR, VDP, etc.- or broadcast).
_SURROUND
CENTER
__
PRE-AMP
AUDIO
Left Front
Right Front
Speaker
jack's volume,
bass, and treble
levels can be adjusted
with the
TV's VOLAV
10ultons of using
the on-screen
Menu controls.
_Sunound
Speak_
J
R, L REAR
SURROUND
SPEAKERS
R SPEAKER
OUTPUT
SPEAKER
OUTPUT
R, L AUOIO INPUT
I_1_1
_
t
1 A
Audio
CENTER
CHANNEL
PRE-AMP OUT
CENTER
R, L FIXED
Amplifier
C pAj_N E
UDIO OUTPUT
CENTER
CHANNEL
I
LEFT SPEAKER
Use the noise _quencer
(or .sound test signal) on
the Dolby Prologic Amplifier. Adjust the Center
Channel volume level (using the Dolby Prologic
Amp's Center Channel Volume control) to equ',d
the left/right and surround speaker volume levels.
If Center Channel volume is still too low after
using the Dolby Prologic Amplifier, use the TV's
Volume conlrol buttons to set desired Center
Channel level.
Make sure the TV's BALANCE
control is set to
the middle position or the Center channel sound
image will not be centered.
Use the Dolby Prologic Amplifier's
Volume
buttons to adjust the surround system sound level.
REAR SURROUND
SOUND
SPEAKERS
/l
RIGHT SPEAKER
25
.... .[
Advertisement
