Sears LXI series 934.55156690 Owner's Manual page 17

Press MENU or SELECT button.
Although seconds are not displayed, they begin count-
ing from 00 when you press MENU or SELECT button.
Use this feature to synchronize the clock with the correct
time.
NOTES:
• When unplugging the AC-cord or if there is a power
failure for more than 3 seconds, " : " flashes on
the display.
• If the display shows an abnormal reading or no read-
ing, unplug the power cord for more than 3 seconds.
Then plug it back in.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Press MENU button.
2) Press CHANNEL • or • button repeatedly to point
to "INITIALIZE".
Then, press SELECT button.
3) Press CHANNEL • or • button repeatedly to point
to "SETTING CLOCK".
Then, press SELECT button.
4) Select a digit you want to change using SELECT but-
ton or ADD/DELETE button.
5) Enter correct numbers using CHANNEL • or •
button.
6) Press MENU button to return to original mode.
If you want to change the language on the TV screen,
follow the steps below:
1 Select the main menu
Press MENU button.
2 Select
"INITIALIZE"
Press CHANNEL • or • button
repeatedly to point to "INITIAL-
IZE".
Then, press SELECT button.
TIMER PROGRAMMING
VCRSETUP
INmALIZE
3 Select "LANGUAGE SELECT"
Press CHANNEL • or • but- [ o,A_'_"_'_p
ton repeatedly to point to "LAN- [ . _,%%_%
GUAGE SELECT".
Then, press SELECT button.
4
Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or
"ESPAlqOL= Spanish" using
CHANNEL • or • button.
LANGUAGESELECT
ENGLISH [ON]
ESPANOL
5 Exit the Language select
Press MENU button to return to TV mode.
ON SCREEN DISPLAY
To check the Remain, Count, Clock and Channel num-
ber on the TV screen and display, press SELECT button.
Each time you press SELECT button, TV screen and
display will change as the illustration:
<OFF mode>
<REMAIN mode>_' Pressonce
<COUNT mode> _vPress once
<CLOCK mode> _v Press once
II FRI CH
premmss ,. 5:_/3.. 2
once sv
- 17-
EN
6A12