Table of Contents
Advertisement
_iq_,LIAL
Vi_Ai
iiALlx
Make sure ...
• VCR power must be turned oil.
• Turn on the TV and set the TV channel to the same
video output channel as located on the back of the
VCR. (CH 3 or 4)
• Press TV/VCR
button so that "VCR" appears
on the
display.
• You must use the remote
control
for the following
procedure.
.'he VCR has the auto repeat function that allows you
to repeat a tape indefinitely without touching the PLAY
button.
• Insert a prerecorded tape.
1
Select the main menu
Press MENU button.
2
Select
"VCR
SET UP"
Press CHANNEL • or • button
repeatedly to point to "VCR SET
UP".
Then, press SELECT button.
MENU
TIMER
PROGRAMMING
VCR
SET UP
INITIALIZE
3 Select "REPEAT PLAY"
Press CHANNEL • or • button
repeatedly to point to "REPEAT
PLAY".
VCR
SET UP
TAPE SELECT
~T130
REPEAT
PLAY
RENTAL
AUTO
RETURN
AUDIO
OUT
3"3/STEREO
[ON I
SAP
4 Begin Auto repeat playback
Press SELECT button so that [ON] will appear next to
"REPEAT PLAY" on the TV screen.
Repeat playback will start automatically.
NOTES:
• Once you select the repeat play mode, it stays in ef-
fect even after you turn off the VCR.
• When the Counter Memory is activated, the tape will re-
wind to 0:00:00 and the VCR will be in the Stop mode.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority.
TO STOP
PLA YBA CK
Press STOP button.
TO EXIT
TIlE
AUTO
REPEAT"
MODE
Repeat steps [1] to [3]. Then, press SELECT button.
[ON] will then disappear from the menu. Press MENU
button to return to TV mode.
-19-
This function enables you to improve the picture quality
when playing back worn cassettes such as those rented
from a video shop.
• Insert rental tape into VCR and begin playback.
I Select the main menu
Press MENU button during playback.
2
Select "VCR SET UP"
Press CHANNEL • or • button
....
TIMER
PROGRAMMING
repeatedly to point to "VCR SET
_ v_.,.,TIAL,EES
....
UP".
Then, press SELECT button.
3
Select "RENTAL"
Press CHANNEL • or • button
repeatedly
to point to "RENT-
AL".
Then, press SELECT button.
VCR SET
UP
TAPE SELECT
-T130
REPEAT
PLAY
RENTAL
AUTO
RETURN
AUDIO
OUT
TV STEREO
ION]
SAP
4
Select "RENTAL" to [ON]
Press SELECT button so that "RENTAL ON" will ap-
pear on the TV screen.
NOTES:
• Once you select the rental play mode, it stays in effect
even after you turn off the VCR.
• Selecting ON or OFF must be done in the play mode
only.
TO STOP
PLA YBA CK
Press STOP button.
TO EXIT
THE
RENTAL
PIA
Y MODE
Repeat steps Ill to [3]. Then, press SELECT
button
so
that "RENTAL
OFF" appears on the TV screen.
EN
6A12
Advertisement
Table of Contents
