GE Profile 23 Owner's Manual And Installation page 9

ge.com
Not oll features are on oll models.
Freezer Baskets
To remove, push the basket all the wag to
the back of the freezer.Lift up until the back
pins are disengaged. Lift the entire basket
up and pull out.
Make sure you push the baskets all the
wag back in before _lou close the door.
ili!i!!;!iiii!jiiiiiii ¸i ¸ii ¸¸I i;! ! !:ii_;(i i !!!_il !i ! i !i_ ¸ ;ii i !!;i i ii i¸;i i¸! !;!i] iiii ¸!i ¸ii;i; i¸)i !i¸ ) i i ¸i ¸!i;!
!iiii i
Slide-Out Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position and
slide out.
Make sure you push the shelves all the wag
back in before you close the door.
Fixed Freezer Shelves
There are two types of fixed freezer shelves.
To remove this type of shelfi
0 Lift the shelf up at the left side.
Bring the shelf out.
Toremove this type of shelfi
Lift up the left side of the shelf and slide it
left into the center of the shelf supports.
Rotate the right side of the shelf up
and out of the shelf supports.
NOTEFORDISPENSER MODELS:In order to
take full advantage of the tilt-out ice bin, onl_l
store items on the shelf below the ice bin that
are no taller than the lowest point on the bin.
Door Wine/Beverage Rack (on some models)
This rack holds up to 5 cans or one bottle
of wine.
The rack hangs from the sides
of the dairy bin.
To remove:
Empty the wine/beverage rack.
Holding the bottom of the dairy bin,
lift the front straight up, then lift up
and out.
To detach the rack from the dairu bin,
pull the rack's side wires out of the holes
on each side of the dairy bin.
To replace:
Reattach the rack to the sides of the bin.
Engage the back side of the bin in
the molded supports on the door.
Then push down on the front of
the bin. The bin will lock into place.
9
O"
;>::: ii
iiiiiiiiiiiiiii_ iiiJ%ii
v,i IFI
. i m
n ,....
v A
u
P_
v
0
0
lal
I/1
"0
"0
0
-%
e_