GE Profile 23 Owner's Manual And Installation page 19

Inserting the door panels.
Read these instructions completelg and carefullg.
0 Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides into If your model has a dispenser,this step only applies
the slot behind the door handle. Pushthe filler panel to the fresh food panel and top freezer panel.
(required with some door panels)in behind the
decorator panel. Repeat for fresh food panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot with some door ponels)in behind the decorator panel.
behind the door handle. Pushthe filler panel (required
0 Attach the Top Trim on the Freezer and Fresh Food Doors.
The TopTrim can be found inside the refrigerator each door. Hand tighten only. Make sure that
compartment, the top of each panel fits snugly behind the lip
of the TopTrim.
With a T-20 Torxdriver,attoch the Top Trim, using
two screws on each Top Trim piece, to the top of
Cut-Out
Side Trim
Side Trim
19
O"
@
t_
0
m
v
0
0
w
t_
"0
"0
0
e,.i-