Water Line Installation - GE Profile 23 Owner's Manual And Installation

Installation
Instructions
Refrigerator
Models 23, 25 end 26
Ouestions? Cell 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, cell 1.800.561.3344 or Visit our Website at: geappliances.ca
BEFORE YOU BEGIN
Read these instructions completelg
and carefullg.
• IMPORTANT - save these instructions
for local inspector's use.
• IMPORTANT - Observe all
g overning
codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these instructions
for future reference.
• Skill level -Installation of this appliance requires
basic mechanical skills.
• Completion time - Refrigerator Installation
30 minutes
Water Line Installation
:30 minutes
• Proper installation is the responsibilitg
of the installer.
• Product failure due to improper installation
is not covered under the Warranty.
If the refrigerator has alreadg been installed,
remove the base grille (see Step 2 in Moving
the Refrigerator), then skip to Step 5 in Installing
the Refrigerator.
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemoker, it will have to be
connected to a cold water line. AGE water supply
kit (containing tubing, shutoff valve, fittings and
instructions) is available at extra cost from your
dealer, b U visiting our Website at ge.com (in Canada
at geappliances.ca) or from Parts and Accessories,
800.626.2002 (in Canada 1.800.661.1616).
TOOLS YOU WILL NEED
3/8" and 5/16" Socket
1/8" Hex Wrench
Phillips Head Screwdriver
1/2" and 7/16" Wrench
Plastic Putty Knife
21