Control Settings - GE GSD4500 GSD4800 Owner's Manual

GEAppliances.com
Control S ettings
O Cycle Selections
Thelight above the selected pad will be ONto indicate which CYCLE SELECTION has been selected.
POTS& PANS Forheavilysoileddishesor cookware with dried-on or baked-on soils.Everyday dishes may be included.
This cyclewill not removeburned-onfoods.
NORMAL Forloadsof everydaydishes,glassesand cookwarewith mediumsoils. NOTE:Many disheshave lightersoil than normal.
Choosing a cycle other than NORMAL will save energyand water.
LIGHTWASH Fordisheswith light soils.
CHINA CRYSTALForlightly soiled chinaand crystal.
RINSEONLY Forrinsingpartial loadsthat will be washed later.Do not use detergent.
Options
The llght above the selected pad will be ON to indicate which OPTIONhas been selected.
HI TEMP Turnson the heater in all postrinseandfinal rinse cyclesto help preventspotting on dishware.This option may be turned
RINSE ONor OFFduringthe washcycle.
HI TEMP Energizes the heaterto boost water temperaturein all prewashand mainwash fill cycles.Recommended f or use with
WASH heavilysoiled dishes.Optionmay beturned ONor OFFduring the wash cycle.
HEATEDDRY Shutsoff the drying heatoption. Dishesair dry naturallyand energyis saved.Youcan prop the door openafter the
OFF CLEANlight illuminates.
HEATEDDRY Turnsthe heateron for fast drying.This cyclewill extendthe time to your washcycle by30 minutes.NOTE:Cannotbe
ON selectedwith RINSE ONLYcycle.
LOCK Whenthe LOCKpad is touched twice within3 seconds, a ll padsbecome inoperative.You can lockthecontrolstoprevent a ny
selections frombeingmade Oryoucanlockthecontrols after youhavestarteda cycleorselected DELAY STARTso thecycleor
DELAY START is not interrupted
Children cannot accidentally start dishwasher by touching pads with this option selected.
Tounlockthe dishwasher a fter it has beenlocked, t ouchthe LOCKpad twice within 3 seconds. T helight above the LOCKpad will
turn off.
DELAYSTART Youcan delaythe start of a wash cyclefor up to 8 hours.Pressthe DELAYSTARTpadto choosethe numberof hoursyou
want to delay the startof the cycle.The machine will countdownand startautomatically at the correcttime. Pressing the
START/RESET buttonwill cancel the DELAYSTARTselection, NOTE: If you forget to latchthe door,a reminder
signal will beepuntil you do so.
RESET Tochangea cycleafter washingstarts, touch the START/RESETpad to cancel the cycle. After water is pumpedout and
the motor stops,you can reprogramand restart the dishwasher.This will take approximately90 seconds.
@
Start
Close and latch the door. Touch the START/RESET pad to begin the cycle. Water fill begins and
approximately 40 seconds later the wash action begins.
NOTE:The dishwasher remembers your last cycle so you don't have to reprogram each time.
When the dishwasher is loaded and the door latch is in the locked position, the control panel
lights will be ON and display the last settings you selected.
If you don't want to change any of the settings, simply touch the START/RESETpadto begin
the cycle.
Also, if a power failure occurs, NORMALand HEATED DRYwill automatically be programmed.
Make any new selections and touch the START/RESETpad to begin the cycle.
O Clean
This light is illuminated when a wash cycle is complete. The light will stay ONuntil the door is
opened.
5