Delay Start; Self Clean - GE JGS968 Owner's Manual

Usingthe self-cleaning oven.
The oven door must be closed and aft controls must be set correctly for the cycle to work proper/y,
iiFqFqu]U]Fq
iF;qFq[ K35q :?
ii!i
How to Belay the Start of Cleaning
[_
Touch
the SELFCLEAN STD/LOW pad
once for a 4-hour clean dine or
h,vice for a ,_hom clean time.
A 3qlour selfkflean dine is
recommended for use when
cleaning small, contained spills. A
self'clean dine
of 4 hours or longer
is recommended Kw a dirtier oven.
[]
If a time other than 4 hours or
3 hom_ is needed, use the number
pads and enter the desired clean
{ilIle.
You can change the clean time to any
time between 3 hours and 5 hom_,
depending on how dirty your oven is.
[-_ Touch the
DELAYSTART
pad.
[_] Using the number pads, enter the
time of day you want the clean cycle
to start.
The door locks automadcNly: The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
mmpemmre and the LOCKEOlight
goes ore
When
the LOCKEDlight goes off, you will
be able to open the doo_:
[_] Touch the START pad.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spotsremain, r emove themwith
a soap-filled orplasticscouring padandrinse
thoroughly w ith a vinegar a ndwatermixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean alter one clean
cycle, repeat the cycle.
}_ You cannot set the oven for cooldng
until the oven is cool enough for the
door to unlock.
While die oven is self cleaning, you
can touch the CLOCKpad to display
the time of day. To return to the clean
countdown, touch the
SELFCLEAN
STD/LOW pad.
If die racks become hard to slide,
apply a small amount of cooldng oil
to a paper towel and wipe the edges
of the oven racks with the paper towel.
26