Sanyo VPC-R1 Instruction Manual page 79

Problem
The focus does The subject is too close to the camera.
The macro switch setting is not correct.
not work.
The camera moved when the shutter release
button was pressed.
The lens is dirty.
The image is The flash was blocked by a finger or the like.
too dark.
The subject was too far away.
The subject was lit from behind.
The image is The forced flash mode was set.
too bright.
The subject was too bright.
The colors of This is due to ambient lighting.
images taken
indoors are not
correct.
Cause & Solution
⇒For distances between 20 and 50 cm, set the
macro switch to [£] (macro photography). For
subjects at least 50 cm from the camera, set
the macro switch to normal photography (no
macro photography indication).
⇒Hold the camera correctly, and slowly press
the shutter release button.
⇒Clean the lens.
⇒Hold the camera correctly, making sure the
flash is not obstructed.
⇒Take the picture within the effective flash range.
⇒Use the forced flash mode.
⇒Correct the exposure.
⇒Select a flash mode other than the forced flash
mode.
⇒Change the angle of the camera.
⇒Correct the exposure.
⇒Take the picture using the forced flash mode.
P.
41
24
27
28
24
24
43
45
43
—
45
43
74
English