Playing Back Sequential Shots - Sanyo VPC-R1 Instruction Manual

PLAYING BACK SEQUENTIAL SHOTS

1
Set the playback mode to the sequential shot playback mode (see
page 29).
2
Press [d] or [c] on the arrow button.
[d]: To display the previous image.
[c]: To display the next image.
3
Press the [MODE] button.
œ The Playback Settings screen is displayed.
4
Press the [SET] button.
œ The 9-image display appears.
œ Each image is displayed with its folder number.
5
Use the arrow button to move the [u] mark to
the desired image, and press the [SET] button.
œ The selected image is displayed full-screen.
HINT
œ To display a different sequential shot, repeat steps 3 to 5.
œ In step 2 with the Playback Settings Screen not displayed, press [j] or [l]
to change to the previous or following sequential shot respectively.
HELP
When the 9-image display is shown in step 1...
œ After step 5, perform step 2.
Sequential Selecting
shots folder mark
0042 0043 0044
0045
32
English