GE Profile Performance WPSE7003 Owner's Manual page 9

Aboutcycle options.
BEEPER
Alerts you when the cycle is complete.
You can turn off the end-of-cycle beeper by pressing this pad.
2ND RINSE
Adds a second rinse to any cycle.
EXTEND SPIN
Extends the last spin of a wash cycle. This will extract more water from your clothes.
Clothes will be drier when you use this option.
[iELA*
DELAY 1-8 HOURS (on some models)
Use to delay the start of your washer for I to 8 hours, First choose your wash cycle and
any options. Then press this pad for the number of hours you want to delay the cycle.
Press the STARTZPAOSEpad to start the countdown.
The countdown time will be shown in the Est. Time Remaining display.
Aboutcyclestatus.
These cycle status indicator lights display what part of the cycle the washer is in.
Per/ecTemp SOAK WASH RINSE 2NO RINSE AUTOBALANCE FINA!.SPIN
PerfecTemp
Perfec Temp
PerfecTempsenses
the incoming water temperature and adjusts the temperature of the
fill water.
The lid must be closed for PerfecTemp to work.
If your water is too cold, detergent will not dissolve effectively and clothes may not get
clean. If the water is too hot, fabrics could be damaged.
PerfecTemp adjusts these water temperature extremes for better washing performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
AUTOBALANCE
Auto Balance
The washer is sensing load distribution for an even spin.
9