GE Appliances AEE08 Owner's Manual And Installation Instructions page 9

Window Installation Instructions
[_] REMOVE THE AIR CONDITIONER
FROM THE CASE (CONT.)
[] Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not
pull or lift on the styrofoam discharge area.
Do not
pull
or lift
this
areai
damage
to the
unit may
result
FRONT
[] INSTALL THE BOTTOM
CASE SEAL
• Peel the backing from the bottom
case seal and attach it along the
bottom of the case in front of the bottom
mounting rail.
Bottom
mounting rail
Bottom case seal
[] INSTALL THE TOP
MOUNTING RAIL ONTO THE CASE
Attach the top mounting rail onto the top
of the case with 3 Type B screws.
Press firmly to drive the screws into the
gasket and through the top mounting rail.
B
screws
1-61 I NSTALL THE
SIDE ACCORDION PANELS
IA] Slide the left and right accordion panels
into the top and bottom mounting rails.
[] Attach the accordion panels to the case
using 3 Type A screws on each side.
Top mounting rail
Accordion --
panel
BACK
Bottom mounting rail
9