Advertisement
Installation
instructions
E_] REVERSING
THE HARDWARE
(CONT.)
4.2 Interchange hinge and screws at top right with screws at
top left of cabinet. Do net tighten
screws on hinge
side at this
time.
Installingthe hingeon the left. Installingthe hingeon the right.
NOTES:
* Some hinges have four holes. Which holes you use
for installing the hinge depends on which side you
install the hinge.
* The outer edge of the hinge should be parallel to the
edge of the case for correct installation.
F-_ REVERSING
THE DOOR
HANDLES
(CONT.)
5.1.3
Remove plug button from the top hinge hole on the left
side of the door and insert it into the hole on the
opposite side that was vacated by removal of the top
hinge.
PlugB_
5.1o4 Pull the plug button from the front of the door and
transfer it to the opposite side.
Plug Button
..__J
Toreattachthe
handle on the
oppositeside.
_] REVERSING
THE DOOR
HANDLES
5.1 Transfer
fresh
food door
handle
5.1.1 Remove the handle plug using a tape-tipped
putty knife under the edge, and remove the
screw underneath.
Remove the two screws
_'
holding the handle to the top of the door.
Plug,_
5.2 Transfer
door stop
5.2.1
Move the plastic door stop and screws from
the right side to the left side.
DoorStop
_/
RightSide
5.2.2 Move the metal door stop from the right side to
the left side and transfer the screw to the
opposite side of the door.
LeftSide
Metal DoorStop
5.3 Reinstall
the fresh
food door
handle
5.3.1
Attach the handle to the right side of the
door with screws at the top
and under the handle plug.
5.3.2
Reinstall the handle plug.
15
Advertisement
