Advertisement
Aboutthe temperature control dial.
Turning the dial to 0/Off stops cooling in both compartmentsifresh
food and freezer. It does not shut off power to the refrigerator.
Temperature
Control
Dial (on
some models)
The temperature
control dial adjust refrigerator
from warmest
to coldest,
The recommended
factory
setting
is shown in illustration
to the left, For colder
temperature
turn dial clockwise
toward
snowflake,
For warmer
temperature
turn
dial counter
clockwise
away from snowflake,
allow 24 hours for adjustment,
<
<
Recommened
factory setting
Coldest setting
Warmest
setting
Aboutthe fresh food compartmentshelves.
Shelf supports
at various
levels allow you to custom-space
your shelves.
Not all features
are on all models.
i l _ii
ii
FT]Tilt up
Half-Width Shelves
One end of the shelf rests on a molded side-
wall support; a bracket on the other end
hooks into a track on the rear cabinet wall,
To remove, lift the shelf up at front, then off
the support and out of the track,
To replace, select desired shelf height, With
shelf front raised slightly, hook the bracket's
top lug into the track, then lower the shelf
onto the support,
NOTE:The shelf to the right of the track is
designed to hook into the right-hand slot; the
shelf to the left is designed to hook into the
left-hand slot,
Dull forward
To removethe full-width shelves
Full-Width
Shelves
Some models have a stationary
tempered
glass shelf, a spillproof
shelf, or two steel
wire stationary
shelves, These shelves can
be moved to another
place in the fresh
food compartment,
When placed correctly on the shelf
supports, the shelf will stop before coming
completely
out of the refrigerator
and will
not tilt when you place food on it or remove
food from it,
Toremove afull-width shelf when
the fresh food compartmentdoor
cannot be opened fully
Spillproof Shelves (onsomemodels)
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves, To remove or replace
the shelves, see the above instructions,
Advertisement
