Advertisement
Installation
instructions
REVERSING
THE DOOR SWING
(CONT.)
[_] REMOVE
THE FRESH
FOOD
DOOR
3.1 Tape the door shut with masking tape.
3.2Using a 5/16"
hex-head socket screwdriver and a
5/16"
open-end wrench, remove the two screws
holding the center hinge to the cabinet. Lift the
center hinge to free its pin from the socket in the top
of the door, and set hinge and screws aside. Be
careful net to lose the center hinge spacer and
washer.
1
3.3 Remove the tape and tilt the door away from the
cabinet. Lift the door from the pin in the bottom hinge
bracket. (if the plastic washer sticks to the door bottom,
put it back on the hinge.)
3.4Set the door outside-up on a non-scratching surface.
_-I REMOVE
THE FRESH FOOD
DOOR
(CONT.)
3.STransfer the two screws from the opposite side of the
cabinet to the screw holes vacated by the center hinge
removal.
3.6Transfer the washer (if your model has one) to the
opposite side.
3.TTake one of the screws removed in step 2 and start
it in the outermost screw hole on the opposite side. Do not
drive it all the way down--leave
enough space under the
screw head for thickness of the bracket.
IJ
F-----
[_] REVERSING
THE HARDWARE
4.1 Move the bottom hinge bracket and plastic washer From the
right side to the left side,
Plastic
"-"_
I
Washer
Switchthe hingepin t0 the
¢.!!.¢---.!
_J
oppositeside of the bracket.
_,_j:
Hinge _
_
Bracket
14
Advertisement
