Operating Instructions; Controls - GE AEE18 Owner's Manual And Installation Instructions

About the controlson the air conditioner.
Features and appearance will vary.
5 6
3F ' 8
))9
,k /o
Warmer Cooler
off
Hi _ _ _
Hi
[1 ?i ° °'
Low\\ I I ///Low
Heat __J CoN
Fan
Only
4
TEMPCONTROL
0
Controls
0
TempControl
The temp control is used to maintain the
room temi)eramre. The compressor will
cycle on and off to kee I) the room at the
same level of comfort. Turn the knob
clockwise
to Cooler (blue) and the indoor
air will become coole_: Turn the knob
counterclockwise
to Warmer (red)
and
the indoor air will become _m_ne_:
MODECONTROL
@
@
@
Mode Control
Hi Cool and Low Cool provide cooling with
different tim speeds,
Hi Heat and Low Heat pr(>vide heating
with
different tim speeds,
Fan Only setting
provides air drculation and
filtering without cooling
or heating.
NOTE: If you move the mode control from a
cool setttbg to Off,, a fan setting or a heat
settlbg, wait at /east 3 minutes before switching
back to a cool setting.
CoolingDescriptions
For Normal Cooliuo--.Select Hi Cool or
Low Coolwith the temp control at midpoint.
For Maximum Cooling--Select Hi Cool with
the temp control turned clockwise as tar as
possible.
For Quieter & Nighttime Coolino--Select
Low Coolwith the temp control at midpoint.
Heating Descriptions
For Normal Heating_Select Hi Heat or
Low Heatwith the temp control at midpoint.
For Maximum Heatino---Select Hi Heat with
the temp control turned counterclockwise as
liar as possible.
For Quieter & Nighttime Heatino--Select
Low Heatwith the temp control at midpoint.
Circulaire
For continuous CircuJaire
side-to-side air
circulation, set Of[ Oil
the Circulaire
switch to On.
For fixed side-to-side air direction, set the
Circulaire switch to On tmtil the desired air
direction is obtained, then move it to Off.