GE AEE18 Owner's Manual And Installation Instructions page 10

Window Installation Instructions
[] REMOVE THE AIR CONDITIONER
FROM THE CASE (cont.)
I_q Remove the locking screw and locking
L_J bracket from the lower
frame. Save to
reinstall later.
I_q Remove the ground screw and save to
ii i
reinstall later,
_'_ Remove the ground screw
and save to reinstall later
[] Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
[] PREPARE THE CASE
[] Install the top mounting rail with 4 type B
screws from the inside of the case.
Press firmly to drive the screws into the
gasket and through the top mounting rail.
[]
Insert the frames for the accordion panels
into the top mounting rail and the bottom
frame guides. Attach the accordion panels
to the side of the case using 3 type A screws
on each side.
NOTE: When attaching the accordion panels,
make sure to only screw the inner panels
to the case sides.
Top mounting rail
Type A
screws
BACK
Bottom mounting rail
[] PREPARE THE WINDOW
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.