Panasonic TY-TP42P30K Operating Instructions Manual page 12

Problem
The touched
Has calibration been
point is
performed? *1
displaced
The touched
Was the touch panel
point is
removed?
displaced
Has Windows 7 been
installed in the computer? *
Dual touch is
Has the touch panel drive
1
not possible*
been installed on Windows
7? *
If the problem is not solved even if the actions have been taken, contact our sales of ce or the dealer
of purchase.
12
Check point
1
1
Action to take
Perform calibration in "General" of "Tablet PC Settings"
of the Control Panel. For more information, see the
help information of Windows.
If the touch panel was removed and mounted again, the
mounting position may not be the same as the previous
one, and thus the touching position and cursor position
may not match. If the touch panel was removed, be
sure to perform calibration.
For Windows 7:
Perform calibration in "General" of "Tablet PC Settings"
of the Control Panel. For more information, see the
help information of Windows.
For Windows XP and Vista:
Perform calibration using the supplied driver software.
For calibration procedure, see the installation manual of
the touch panel driver software included in the supplied
CD-ROM.
Dual touch is available only on Windows 7. Use the
computer with Windows 7 OS.
Installing the touch panel driver on Windows 7 will
disable dual touch. Uninstall the touch panel driver
because it is not necessary on Windows 7.
Page
–
–
–
–