FEATURES CONTENTS Page SAFETY INFORMATION DVD, CD, MP3 compatible CD-R, CD-RW capable INTRODUCTION TV format: About DVD PAL / NTSC color system About the player LB/PS screen format select Front panel Rear panel Remote control Video output: Composite Video output S-Video output SYSTEM CONNECTION System connection figure...
SAFETY INFORMATION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION danger and should not be modified so as to defeat the safety features. This To reduce the risk of fire will help avoid any potential hazard from electrical shock or fire.
INTRODUCTION Select a DVD disc About DVD DVD Region Code DVD (Digital Versatile Disc) is a digital video medium under the MPEG II format, featuring a variety of DVD discs and DVD players are manufactured revolutionary entertainment capabilities. The MPEG II under the worldwide agreed DVD Regional Code System that the player will operate only video compression technology provides capacity for an...
INTRODUCTION STANDBY SUBTITLE NUMBER KEYS ANGLE AUDIO PROG SEARCH SETUP NAVIGATION KEYPAD P-SCAN TITLE MENU DISPLAY SLOW ZOOM NEXT BUTTON / PLAY/PAUSE FAST FORWARD STOP BUTTON PREV BUTTON / FAST BACKWARD REPEAT MUTE OPEN/CLOSE Notes The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the player`s infrared sensor during operation.
SYSTEM CONNECTION Select ONE of the below connections ONLY: Connect the player s audio Left & Right, Composite Video (or S-Video) outputs to the TV`s audio left, right and Video (or S-Video) inputs. Connect the player's Y, Cb, Cr audio L/R to the TV's Y , Cb, Cr audio Pb/Cb Pr/Cr L/R as shown in Diag 2 for Progressive Scan.
GETTING STARTED Switch on the player Unpack the unit. Press the main power switch on the DVD player. Read through this owner`s manual before Power on the TV set, and the amplifier if connected. installation and use. Load batteries into the remote control unit. Set up the system Connect the system, make sure the connec- Select the corresponding setting of the TV set...
GETTING STARTED Problem disc messages The following message will display on screen when there is a format problem with the loaded disc: WRONG REGIONAL DISC Region code of the disc is not matching to the player`s region code (region 1 to region 6). WRONG PASSWORD The rating level of the disc is higher then the rating level setting of the player.
FUNCTION BUTTONS To turn the unit on when it is in the standby Press STOP to end disc playback. mode, press the STANDBY button on the a) If STOP is pressed once, the player will remote control. resume play from the interrupted position when PLAY is pressed (the OSD will read Multi - Angle / Subtitle / Audio PRESTOP).
FUNCTION BUTTON Numeric Keypad Press to change the DVD player to interlace (Direct Program access) Scan and Progressive Scan alternately. Enters numbered choices and selections on the on-screen menus. PROGRAM Program a disc to play back in a defined sequence. Press PROG to enter the program menu.
FUNCTION BUTTON GENERAL SETUP Setup TV screen format, video type and all DVD functions. General Audio Dolby Video Preference -- General Setup Page -- Tv Display Angle Mark Osd Lang Captions Screen Saver Hdcd TV Display To access the SETUP menu: Follow the operating instructions stated in DVD Press SETUP on the remote.
FUNCTION BUTTON Angle mark Screen Saver When a DVD providing multiple angles is used, the Select in System Setup menu to get screen saver user may select a particular shooting angle. setting according to the following figure. Follow the operating instructions stated in DVD menu setup to select the desired option in the following figure.
FUNCTION BUTTON Downmix Dynamic The function is generally used when playing high This setting is suitable for films. If you want to volume programs at night, in order not to disturb enjoy music, the stereo is recommended to select the neighbour. This setting can dynamically lower the option.
SETUP MENU (Press SETUP button) Brightness/Contrast Audio Sets the default audio language when a DVD is Follow the operation instructions stated in DVD played (if the DVD supports the selected menu setup to select the desired option in the language). following figure.
SETUP MENU (Press SETUP button) Parental You can change the password, please type 4 numerals as new password. Follow the operation instructions stated in DVD (Be sure remember new password.) menu setup to select the desired option in the If you forget your password, enter 1389. This is following figure.
TROUBLE SHOOTING Should your DVD player develop a problem, please check below before requesting service: Symptom Check and Action Check if the power cord has been properly connected to the power outlet. No Power Check if the main power button on the DVD player has been switched on. Remote Control Make sure that the Main Power button on the DVD player has been switched on.
TROUBLE SHOOTING CAUTION : To reduce the risk of fire and electric CAUTION shock, do not remove the cover (or back) of the unit. Refer RISK OF ELECTRIC SHOCK DO NOT OPEN servicing only to qualified service personnel. Symptom Check and Action Cannot SKIP Some discs are programmed that do not allow users to SKIP or SEARCH or SEARCH...