Switching The Alarm On/Off; Lock Button - Grundig G1100 Owner's Manual

SWITCHING THE ALARM ON/OFF

With the radio turned on or off, press the AL. ON/OFF button. The
alarm activation symbol appears in the upper right corner of the LCD
and looks like a loudspeaker. Turn it off by pressing the AL. ON/OFF
button again and the symbol disappears.
When the activated alarm turns the buzzer or the radio on, it can
be turned off by pressing the AL. ON/OFF button. This will cause the
loudspeaker symbol to disappear from the display.
LIGHT/SNOOZE
A quick press of the LIGHT button causes the display to be illuminated
for about 5 seconds. Use a long press to permanently light the display
(note that this causes increased battery usage). Press LIGHT/SNOOZE
again to turn it off.
While the alarm is on, pressing the SNOOZE button causes the alarm
to pause for about 10 minutes, and then continue. This can be
repeated three times.

LOCK BUTTON

With the radio turned off, press this button for two seconds to lock
it; 'Hold' appears in the display. Press the button again to unlock it;
'Un-H' appears in the display.
G1100 OWNER'S MANUAL
7