Miele CVA 615 Operating And Installation Manual page 50

Frequently asked questions
What if...
. . . no water runs out of
the dispensers?
. . . there is no crema?
. . . the grinder setting
slide won't move?
. . . water appears in the
waste unit?
. . . the brew unit cannot
be removed?
. . . the brew unit cannot
be pushed into the
appliance?
50
Possible fault
The brew unit is clogged. Clean the brew unit filters.
Check if the grinder is set
to the coarsest or finest
setting.
The coffee is not fresh.
The coffee dispensers are
set too high.
Check the temperature
setting of each drink
option.
Coffee beans are
blocking movement.
This is not a fault. This is
water residue from the
cleaning process.
The brew unit is only
accessible, when the
waste unit is removed.
If the brew unit cannot be
removed even when the
waste unit is removed it is
not in the basic position.
The brew unit is not in the
basic position.
Fix
Adjust the coffee grinder
setting.
Use fresh coffee beans.
Lower the height
adjustable dispensers.
If the temperature is too
high, the crema will
collapse.
Close the unit and
dispense a coffee.
The slide control can now
be moved.
Empty the waste unit.
Close the door and turn
the appliance on.
The brew unit will
reposition itself to the
basic position.
The funnel must be lifted
up and the connection
piece must be in an
upright position.
See "Coffee system care/
Resetting the basic
position."