Miele CVA 615 Operating And Installation Manual page 49

What if...
. . . the espresso is
dispensed too
quickly?
. . . the espresso is
dispensed too
slowly?
. . . the coffee is not
hot enough?
. . . coffee was not
dispensed although
the beans were
ground and the water
tank is full?
. . . the descaling
process was started
accidently?
. . . the warm up time
is longer, less water
is dispensed and the
machine is not
working properly?
Frequently asked questions
Possible fault
The grinder is set to
too coarse of a
setting.
– The grinder is set
to too fine of a
setting.
– The brew unit
needs to be
cleaned.
Was the system
warmed?
Was the grinder set
to the finest and to
the maximum
quantity of coffee?
The unit needs
descaling.
Fix
Select a finer setting.
– Select a coarser setting.
– See "Coffee system care".
Pre-warm the system and cups.
Check the temperature setting of
the coffee selected.
Check if the brew unit is clogged.
Clean the brew unit.
The grinding process might have
taken too long not allowing time for
brewing.
Set the grind size or the grinding
amount to a different position.
Press ENTER once.
The program will stop.
If descaling agent is in the water
tank, empty the water tank and
rinse thoroughly with fresh water to
clean away any descaling agent.
The descaling process cannot be
canceled once the steam selector
is turned. The process must be
completed. This is a safety feature
so that the unit descales
completely.
Descale the machine.
See "Descaling the appliance."
49