Specifications - McIntosh D100 Owner's Manual

Audio Specifications
Frequency Response
+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz (Source dependent)
Total Harmonic Distortion
0.0015%
Fixed Output level
2.0Vrms Unbalanced
4.0Vrms Balanced
Variable Output level
0 - 8.0Vrms Unbalanced
0- 16.0Vrms Balanced
Signal To Noise Ratio (A-Weighted)
110dB
Dynamic Range
100dB
Output Impedance
600 ohms Unbalanced and Balanced
Headphone Load Impedance
20 to 600 ohms
18
Digital Audio Specifications
Digital Input Format
SPDIF (PCM )
1
Digital Input Sample Rate
Coaxial and Optical: Up to 192KHz, 24-Bit
USB: Up to 192KHz, 32-Bit
Digital Inputs
Coaxial 1 and 2: 0.5V p-p/75 ohms
Optical 1 and 2: - 15dbm to -21dbm (TOS Link)
USB: USB Type B Connector
1 PCM (Pulse Code Modulation) Digital Signal type used for
CD Discs, etc.
General Specifications
Power Control
12VDC, 25mA
Power Requirements
Field AC Voltage conversion of the D100 is not pos-
sible. The D100 is factory configured for one of the
following AC Voltages:
100 Volts, 50/60Hz at 20 watts
110 Volts, 50/60Hz at 20 watts
120 Volts, 50/60Hz at 20 watts
220 Volts, 50/60Hz at 20 watts
230 Volts, 50/60Hz at 20 watts
240 Volts, 50/60Hz at 20 watts
Standby Power, less than 0.25 watts
Note: Refer to the rear panel of the D100 for the correct
voltage.
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 3-7/8 inches (9.8cm) including feet
Depth is 16 inches (40.64cm) including the Front
Panel, Knobs and Cables
Weight
13.5 pounds (6.1 kg) net, 28 pounds (12.7 kg) in ship-
ping carton
Shipping Carton Dimensions
Width is 26-1/2 inches (67.3cm)
Height is 11-3/4 inches (29.9cm)
Depth is 24-1/4 inches (62.2cm)

Specifications