Mazda 5 Maintenance And Care page 44

Mazda5_8CN3-EA-12I_Edition1 Page377
Tuesday, September 4 2012 1:25 PM
4. Pull the unit rearward to remove it.
5. Turn the socket and bulb assembly
counterclockwise and remove it.
6. Disconnect the bulb from the socket.
Brake lights/Taillights/Rear side-
marker lights
Form No.8CN3-EA-12I
Black plate (377,1)
Owner Maintenance
Rear turn signal lights
7. Install the new bulb in the reverse order
of the removal procedure.
NOTE
To install the unit, insert the hooks (2
locations) on the unit side into the clips on the
vehicle side, and install the unit.
Clip
Hook
Reverse lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
Maintenance and Care
8-47