Mazda 5 Maintenance And Care page 31

Mazda5_8CN3-EA-12I_Edition1 Page364
Tuesday, September 4 2012 1:25 PM
Maintenance and Care
Owner Maintenance
NOTE
Remove the battery cover before performing
battery maintenance.
CAUTION
Ø Do not use a tool which applies
excessive force such as a
screwdriver or pliers.
If excessive force is applied to the
clips, they could be damaged.
To prevent damaging the battery
cover, remove/install the battery
cover using the following
procedure.
Removing battery cover
1 Detach the clip facing the side of
the vehicle first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip
8-34
Form No.8CN3-EA-12I
Black plate (364,1)
2 Detach the clip facing the vehicle
interior first and pull it outward
with your finger approx. 4 mm (0.2
in). Then, lift the cover slightly to
clear the lock.
Clip