Lumbar Adjustment - Mazda 6 Smart Start Manual

Seats
ELECTRONiCALLY OPERATED DRiVER SEAT w/MEMORY
Slide/Tilt Switch
Push forward or backward to slide seat
bottom. Seat can also be raised, lowered or
tilted with this control.

Lumbar Adjustment

Rotate clockwise to
increase support and
counterclockwise to
decrease support.
To Program the Driver's Seat Position:
1 Park vehicle.
2 A djust seat to desired position using the Slide/Tilt and Recline switches.
3 W hile pushing the memory seat SET button, push one of the three
programming buttons until beep is heard. Programming is now
complete. Program the remaining two buttons as desired.
To return to the programmed position:
• W hen entering the vehicle with the door open and the ignition OFF,
the seat will move to the programmed position with one touch of the
button (1, 2 or 3).
• I n all other situations (door closed or engine running), you must push and
hold the button (1, 2 or 3) to move the seat to the programmed position.
NOTE:
•
Memory seat functions do not operate while the vehicle is in motion.
•
You can also program one seat position for each advanced key/retractable type
3
key used with the vehicle. See Owner's Manual for programming instructions.
189242_09c_Mazda6_SSG_112108.indd 4
Memory Seat Switch
Recline Switch
Push forward or backward
to adjust seatback angle.
11/21/08 3:19:25 PM