Mazda CX-5 Manual page 402

CX-5_8CT5-EA-12K_Edition1 Page402
Friday, October 19 2012 3:12 PM
Maintenance and Care
Owner Maintenance
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
í
Fog lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off
engine. If you are changing the left
bulb, turn the steering wheel to the left.
3. Pull the center of each plastic retainer
and remove the retainers.
Removal
Installation
í
6-44
Some models.
Form No.8CT5-EA-12K
Black plate (402,1)
4. Turn the screw counterclockwise and
remove it, and then partially peel back
the mudguard.
5. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.