Mazda CX-5 Manual page 237

CX-5_8CT5-EA-12K_Edition1 Page237
Friday, October 19 2012 3:11 PM
Three-dimensional object on vehicle rear
Because the distance guide lines are displayed based on a flat surface, the distance to the
three-dimensional object displayed on the screen is different from the actual distance.
(Screen display)
Sensed distance on screen A>B>C
qPicture Quality Adjustment
WARNING
Always adjust the picture quality of the rear view monitor while the vehicle is
stopped:
Do not adjust the picture quality of the rear view monitor while driving the vehicle.
Adjusting the picture quality of the rear view monitor such as brightness, contrast,
color, and tint while driving the vehicle is dangerous as it could distract your
attention from the vehicle operation which could lead to an accident.
Picture quality adjustment can be done while the shift lever is in reverse (R).
There are four settings which can be adjusted including, brightness, contrast, color, and
tint. When adjusting, pay sufficient attention to the vehicle surroundings.
1. Press the setup button (
2. Touch the and
Touch the on-screen button to return to the camera image display.
Form No.8CT5-EA-12K
A
B
C
(Actual distance) B>C=A
) to display the picture quality adjustment screen.
on-screen buttons to change the set value.
Black plate (237,1)
Rear View Monitor
(Actual condition)
A
C B
When Driving
4-109