Mazda CX-5 Manual page 191

CX-5_8CT5-EA-12K_Edition1 Page191
Friday, October 19 2012 3:11 PM
Auto-wiper control
When the wiper lever is in the
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wipers on or off automatically
(off intermittent low speed high
speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch downward for higher
sensitivity (faster response) or rotate it
upward for less sensitivity (slower
response).
Switch
Form No.8CT5-EA-12K
Less sensitivity
Center
position
Higher sensitivity
Black plate (191,1)
Switches and Controls
CAUTION
Ø Do not shade the rain sensor by
adhering a sticker or a label on
the windshield. Otherwise the rain
sensor will not operate correctly.
Rain sensor
When Driving
4-63