Mazda CX-5 Manual page 278

CX-5_8CT5-EA-12K_Edition1 Page278
Friday, October 19 2012 3:11 PM
Interior Features
Audio System
qOperating the Radio
Audio button
Radio ON
Press the audio button (
the on-screen tab.
Band selection
Touch the on-screen tab to switch
the band as follows:
FM1→FM2→AM
NOTE
is displayed when FM1 is selected,
l
is displayed when FM2 is
selected, and is displayed when AM
is selected.
If the FM broadcast signal becomes weak,
l
reception automatically changes from
STEREO to MONO for reduced noise, and
the "STEREO" indicator will no longer
display.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
5-40
Form No.8CT5-EA-12K
Manual tuning
) and touch Turning the manual tuning dial will
change the frequency higher or lower.
NOTE
When an
received, a receivable multicast channel is also
received.
Seek tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the seek
l
tuning button (
continue changing without stopping.
When an
l
received, a receivable multicast channel is
also received.
Black plate (278,1)
Seek tuning buttons
Manual tuning dial
broadcast is being
, ) the frequency will
broadcast is being
, )