Mazda CX-5 Manual page 134

CX-5_8CT5-EA-12K_Edition1 Page134
Friday, October 19 2012 3:10 PM
When Driving
Start/Stop Engine
7. Press the push button start after both
the KEY indicator light (green) (if
equipped) in the instrument cluster and
the push button start indicator light
(green) illuminate.
NOTE
After starting the engine, the push button
l
start indicator light (amber) turn off and
the ignition is in the ON position.
After pressing the push button start and
l
before the engine starts, the operation
sound of the fuel pump motor from near the
fuel tank can be heard, however, this does
not indicate a malfunction.
8. After starting the engine, let it idle for
about ten seconds.
NOTE
Whether the engine is cold or warm, it
l
should be started without the use of the
accelerator.
If the engine does not start the first time,
l
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-17).
4-6
Form No.8CT5-EA-12K
Black plate (134,1)
qEngine Start Function When Key
Battery is Dead
CAUTION
When starting the engine by holding
the transmitter over the push button
start due to a dead key battery or a
malfunctioning key, be careful not to
allow the following.
Otherwise the signal from the key
will not be received correctly and the
engine may not start.
Ø Metal parts of other keys or metal
objects touch the key.
Ø Spare keys or keys for other
vehicles equipped with an
immobilizer system touch or come
near the key.
Ø Devices for electronic purchases, or
security passage which touch or
come near the key.
If the engine cannot be started due to a
dead key battery, the engine can be started
using the following procedure:
1. Depress the brake pedal (automatic
transaxle) or fully depress the clutch
pedal (manual transaxle).