Mazda J16R Manual page 56

J16R_8S06-EA-03H_Edition3.book Page 48 Thursday, March 4, 2004 4:14 PM
Essential Safety Equipment
Child Restraint
2. If your child-restraint system requires
the use of a tether strap, peel back the
carpeting in the rear luggage
compartment to expose the anchor
bracket (above the marking).
Anchor bracket
location
3. Hook the tether strap by following the
child-restraint system manufacturer's
instructions.
Tether strap position
Anchor
bracket
2-48
Black process 45.0° 240.0 LPI
Form No. 8S06-EA-03H
Child-Restraint Tether Usage:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury. Use the
tether and tether anchor only for a
child-restraint system.
Marking
M Third-Row Outboard Seats
Child-Restraint System
Installation
The third-row outboard seats cannot
accommodate LATCH-type child-
restraint systems or tethers, therefore
these systems must be installed on the
other seat positions such as the second-
row or third-row center seat. If this not
Tether
possible, LATCH-type child-restraint
strap
systems or tethers should be installed
using seat belts depending on whether the
child-restraint manufacturer allows their
use without LATCH attachments and
tether anchors.
Follow these manufacturer's instructions
when using a child-restraint system.
NOTE
Follow the child-restraint system
manufacturer's instructions carefully.
Depending on the type of child-
restraint system, it may not employ
seat belts which are in automatic
locking mode.
WARNING