Mazda J16R Manual page 22

J16R_8S06-EA-03H_Edition3.book Page 14 Thursday, March 4, 2004 4:14 PM
Essential Safety Equipment
Seats
M Seat Slide
To move the seat forward or backward,
raise the lever and slide the seat to the
desired position and release the lever.
Lever
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
M Side-Sliding Seat (right side)
The second-row seats can be put together
and used as a bench seat. Raise the side
seat-slide lever and slide the seat
sideways.
Side seat-slide lever
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it from side to side.
2-14
Black process 45.0° 240.0 LPI
Form No. 8S06-EA-03H
M Seat Recline
WARNING
Reclining:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back
and upright.
Reclining the Second-Row Seatback:
Reclining the second-row seatback
when the third-row seat is occupied is
dangerous. The second-row seatback
may hit and injure the occupants in
the third-row seat. Don't recline the
second-row seatback when the third-
row seat is occupied.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Lever