Mazda J16R Manual page 289

J16R_8S06-EA-03H_Edition3.book Page 33 Thursday, March 4, 2004 4:14 PM
7. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
8. Replace the bulb.
9. Install the new bulb in the reverse order
of removal.
NOTE
• Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
• When reinstalling the sealing cover,
make sure faces up.
Replacing a fog light bulb*
1. Turn the screw counterclockwise and
remove it, then partially peel back the
mudguard.
Black process 45.0° 240.0 LPI
Form No. 8S06-EA-03H
Owner Maintenance
2. If a retaining spring is equipped, swing
it outward.
3. Disconnect the socket from the
electrical connector by pressing the tab
on the connector with your finger.
4. Turn the bulb counterclockwise and
remove it. Carefully remove the fog
light bulb from its socket by pulling it
straight back.
5. Install the new bulb in the reverse order
of removal.
*Some models.
Maintenance and Care
8-33