2-Point Type Seat Belt - Mazda J16R Manual

J16R_8S06-EA-03H_Edition3.book Page 37 Thursday, March 4, 2004 4:14 PM
M Air Bag/Front Seat Belt
Pretensioner System Warning
Light
If the air bag/front seat belt pretensioner
system is normal, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. After about 6 seconds it
goes out.
A system malfunction is indicated when
the warning light constantly flashes,
illuminates or doesn't illuminate at all
when the ignition switch is turned to the
ON position. If any of these occur, consult
an Authorized Mazda Dealer as soon as
possible. The system may not work in an
accident.
WARNING
Self-Servicing the Air Bag/
Pretensioner Systems:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled. This
could cause serious injuries. Never
tamper with the systems and always
have an Authorized Mazda Dealer
performs all servicing and repairs.
Black process 45.0° 240.0 LPI
Form No. 8S06-EA-03H
Essential Safety Equipment
Seat Belt Systems

2-Point Type Seat Belt

M Fastening the Seat Belt
1. Pull the tongue to the desired length.
2. Insert it into the buckle until you hear a
click.
Buckle
3. Adjust the belt length.
• To lengthen the belt, hold the tongue
at a right angle to the webbing and
pull.
Lengthen
Tongue
2-37