Advertisement
of moving parts, breakage of parts, mounting, and other conditions that may affect
i t s operation. A guard or other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise indicated elsewhere in this
instruction manual. Have defective switches replaced by authorized service center.
Don't use tool if switch does not turn
it
on and off.
19. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded sur-
faces. For example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the t o o l t o a power source (receptacle, outlet, etc.) be sure
the voltage supplied
is
the same as that specified o n the nameplate o f the tool.
A
power source with
voltage greater than that specified f o r the t o o l can result in SERIOUS INJURY t o the user
-
as well as
damage t o the tool. If in doubt, DO N O T PLUG IN THE TOOL. Using a power source with voltage
less than the nameplate rating
i s
harmful t o the motor.
Nibbler & Standard Equipment
Tool body
Punch
3
Advertisement
