Resetting The Player - Marantz DV9500 User Manual

6 DVD Setup Menu
HDMI Audio Output
Dolby Digital
Dolby Digital Karaoke
Linear PCM
DTS
MPEG
DVD-Audio
CD/MP3/Super Audio CD*
DTS CD
Video CD
*1 : The player automatically switches to PCM output when the connected device does not support Dolby
Digital, DTS, or MPEG bit streams.
*2 : Audio is not output from DVD-Audio discs with CPPM copyright protection.
• Audio is not output for sections marked with
*3 : Audio is not output from discs that prohibit 5.1 channel mode or downmixing.
*4 : Audio is not output from Super Audio CDs. This applies to only play the CD Audio part.

Resetting the Player

Resetting the player returns all menu,
picture and password settings to their
factory defaults.
To reset the player, press and hold
7 (STOP) on the front panel when press-
ing Power switch to turn the power on.
POWER ON/OFF
STANDBY
POWER ON/OFF
54
Audio Formats
Dolby Digital*
Dolby Digital*
With CPPM protection
Without CPPM protection 2 Channel DOWNMIX*
4
7 (STOP)
PLAY STOP PAUSE
OPEN/CLOSE
HDMI/DVI
PHONES LEVEL
FL OFF
- +
HDMI Setting (Audio)
Auto PCM
2 Channel DOWNMIX
1
Left/Right
1
Left/Right Left/Right
DTS* 1 2 Channel DOWNMIX
Left/Right
MPEG* 1
—* —* 2
2
3 2 Channel DOWNMIX*
Left/Right
DTS
Left/Right
in the table.
Note
• Static electricity or other external influences
may cause malfunctioning of this unit. In this
case, unplug the power cord and then plug back
in. This will usually reset the unit for proper
operation. If this does not correct the problem,
please consult your nearest MARANTZ service
center.
• If this operation is performed, all memories in
which the Program Memory (page 25),
Condition Memory (page 21), Bookmark
(page 24), Capture (page 29) and Video
Adjust's Memory (page 30) have been entered
are simultaneously erased. Be extremely careful
before doing this operation.
3