Switch Action; Reversing Switch Action; Speed Change - Makita 6093D Instruction Manual

Switch action
Tool
speed is increased by increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger. Release the trigger
t o stop.
CAUTION :
Before inserting the battery cartridge into the tool, always check to see t h a t the trigger
switch actuates properly and returns t o the "OFF" position when released.
Reversing switch action
This tool has a reversing switch t o change
the direction of rotation. Slide the revers-
ing switch to the right for clockwise rota-
tion or t o the left for counterclockwise.
Reversino
switch
1
CAUTION :
0
Always check the direction of rotation before operation.
.Use the reversing switch only when the tool comes t o a complete stop. Changing the
direction of rotation before the
tool
stops may
ruin
the tool.
Speed change
T o change the tool speed, t u r n the speed
change knob so t h a t the arrow of the de-
sired speed on the knob is aligned with the
0
-
400 R/min.
Speed change knob
refet-ence arrow
on
the
tool
body. If the
speed change knob does not
t u r n
easily,
switch
on the tool and t u r n the knob again
while the tool
is running
under
no
load.
8