Additional Safety Rules For Charger & Battery Cartridge; Additional Safety Rules - Makita 6093D Instruction Manual

ADDITIONAL SAFETY RULES
FOR CHARGER &
BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is BELOW 1 0 ° C (5OOF)
2. Do not attempt to use a step-up transformer, an engine generator or DC power
3. Do not allow anything to cover or clog the charger vents.
4. Do not short the battery cartridge:
or
ABOVE 4OoC (104OF).
receptacle.
(1) Do not touch the terminals with any conductive material.
(2) Avoid storing battery cartridge in a container with other metal objects such
(3) Do not expose battery cartridge t o water or rain.
a s nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5. Do not store the tool and Battery Cartridge in locations where the tempera-
6. Do not incinerate the Battery Cartridge even if it is severely damaged or is
7. Always cover the battery terminals with the battery cover when the battery
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
cartridge is not
in use.
ADDITIONAL SAFETY RULES
1. B e aware that this tool is always in an operating condition, because
it
does
2. Always be sure you have a firm footing.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. When drilling into walls, floors
or
wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if
you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6. Do not leave the tool running. Operate the tool only when hand-held.
7. Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5