I M PO RTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. KEEP WORK AREA CLEAN.
Page 3
14. REMOVE KEYS AND ADJUSTING WRENCHES. Form habit of checking t o see that keys and adjusting wrenches are removed from tool before turning 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is when plugging in.
ADDITIONAL SAFETY RULES Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations. 2. Hold the tool firmly. Keep hands away from rotating parts. When drilling into walls, floors or wherever "live" electrical wires may be encountered, NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool by the insulated grasping surfaces t o prevent electric shock if...
Page 5
Switch action Tool speed i s increased by increasing pres- sure the trigger. To start the tool, simply pull the trigger. the trigger to stop. Release For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
CAUTION These accessories o r attachments are recommended f o r use w i t h y o u r Makita t o o l specified in this manual. The use o f any other accessories or attachments m i g h t present a risk of i n j u r y t o persons. The accessories or attachments should be used o n l y i n the proper and intended manner.
Page 7
Feb -01-'91 Note: The switch and other part configurations may differ from country to country.
Page 8
MAKmA UMmD ONE YEAR WARRANTY warranty Policy Every Makita tool is thorou ly l n F t e d and tested before leaving the factory. It is warranted to free of defects from w o r k & and materinls for the period of ONE YEAR from the date of original purchase.