LG 84WS70MS Owner's Manual page 60

60
CONTROLLING THE MULTIPLE PRODUCT
12. Remote Lock /Key Lock(Command: k, m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
13. Balance(Command: k, t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H
00H: Step L50
64H: Step R50
* Refer to 'Real data mapping'.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
14. Abnormal state(Command: k, z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check the status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the monitor off by Remote Control
03: Turn the monitor off by Sleep Timer function
04: Turn the monitor off by RS-232C function
08: Turn the monitor off by Off Time function
09: Turn the monitor off by Auto Off function
15. White Balance Red Gain(Command: j, m)
To adjust white balance red gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00~FE: Red gain 0~254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
16. White Balance Green Gain(Command: j, n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00~FE: Green gain 0~254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
17. White Balance Blue Gain(Command: j, o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00~FE: Blue gain 0~254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]