Learning Ftg Configuration From A Tv - LG 26LT670H Setup Manual

FTG Mode via CPU (Cont.)

Learning FTG Configuration from a TV

To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration
file using the FTG File Manager as described on pages 39 to 40. However, if necessary, this option
enables you to save (Learn) an FTG Configuration file from an LT670H or LS675H TV to a USB memory
device.
Notes: • The option to save (Learn) an FTG Configuration file from a TV may be desirable or required
in either of the following situations:
− If you want to save customized TV setup menu settings to the FTG Configuration file
(in addition to the FTG Channel Map and FTG Installer Menu settings).
− If you do not know the RF channels at the site.
• If the TV is NOT already in FTG Mode, you may need to perform some manual configuration
on the TV before you start this procedure (see "Optional Manual Configuration / TV Setup"
on following page).
1. Turn ON the TV, and then plug a USB memory device into the USB
IN port on the TV.
2. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus (TV is in Pass-through Mode) or the Function Menu
(TV is already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from
the Function Menu. Then, press the number "7" key a total of seven
times to display the USB Download Menu.
4. To gain access to the Learn From TV options in the USB Down-
load Menu, key in the password used to access the Installer Menu
(Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and
then press OK.
6. To differentiate this .tlx file from others, you can use the Up/Down
arrow keys to change the last five digits of the filename. Press OK
when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window.
Do NOT remove the USB device until Learning is complete. When
the Learning process is complete, the USB Download Menu will
reappear on the screen.
7. When Learning is done, press
USB Download Menu, and remove the USB memory device.
Note: It is highly recommended that you open this FTG
Configuration file in the FTG File Manager—BEFORE transferring
(Teaching) the file to any TVs—to verify FTG Channel Map and
FTG Installer Menu settings and enable Pro:Idiom decryption by
marking Encrypted channels. This will also enable you to confirm
channels and add channel attributes, labels, etc.
42
on the Installer Remote to exit the
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous
Learn From TV (TLX)
Select the file name and press OK to start
xxLT670H-UA00005.TLX
Previous
Learn From TV
UPDATING...
Do not unplug!
OK
-
OK
25%
206-4213