Connecting Usb Devices; Connecting Microphone And Speaker/Headphones - Lenovo VDK8726 User Manual

User's Manual
Upon the connection it's normal that the screen flicks black a couple of times. Once
the connection is done, an extended screen will appear on the add-on monitor.
Sometimes it takes time for the add-on monitor to show the video. Please wait for a
while.
For Windows Vista ® , if the add-on monitor has been blank for a while, please
reboot your system again.
To change the display mode, see next chapter for instructions.

Connecting USB Devices

Connect your USB devices to the USB ports on the docking station. As long as one
USB device is connected to the port and the connection works properly, the USB
LED glows green (on). When no USB device is connected to the ports, the USB LED
light is off.
If your USB devices, such as printers and optical drives, require higher power to
operate, please make sure they are powered well with their owner power adapter

Connecting Microphone and Speaker/Headphones

To connect your speaker/headphones, insert the plug to the audio output port on the
front of the docking station.
To connect a microphone, insert the plug to the microphone input port on the front of
the docking station.
Lenovo USB Video Docking VDK8726
12