Advertisement
General Safety Instructions
Work Safely
Trimmers operate at very high speeds and can do serious dam-
age or injury if they are misused or abused.
WARNING!
Use only authorized Shindaiwa parts and
accessories with your Shindaiwa trimmer. Do not make
modifications to this unit without the written approval of
Echo, Inc.
WARNING!
Minimize the Risk of Fire
NEVER smoke or light fires near the unit.
ALWAYS stop the engine and allow it to cool before
refueling. Avoid overfilling and wipe off any fuel that may
have spilled.
ALWAYS inspect the unit for fuel leaks before each
use. During each refill, check that no fuel leaks from
around the fuel cap and/or fuel tank. If fuel leaks are
evident, stop using the unit immediately. Fuel leaks
must be repaired before using the unit.
ALWAYS move the unit to a place well away from a fuel
storage area or other readily flammable materials before
starting the engine.
NEVER place flammable material close to the engine
muffler.
NEVER run the engine without the spark arrester
screen in place.
Safety Labels
Stay Alert
You must be physically and mentally fit to operate this unit
safely.
WARNING!
Never operate power equipment of any kind
if you are tired or if you are under the influence of
alcohol, drugs, medication or any other substance that
could affect your ability or judgement.
WARNING!
Use Good Judgment
NEVER operate the engine when transporting
the unit.
NEVER operate the engine indoors! Make sure there
is always good ventilation. Fumes from engine exhaust
can cause serious injury or death.
ALWAYS use the proper cutting tool for the job.
ALWAYS stop the unit immediately if it suddenly begins
to vibrate or shake. Inspect for broken, missing or im-
properly installed parts or attachments.
NEVER extend trimming line beyond the length speci-
fied for your unit.
ALWAYS keep the unit as clean as practical. Keep it
free of loose vegetation, mud, etc.
ALWAYS hold the unit firmly with both hands when cut-
ting or trimming, and maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire before per-
forming any maintenance work.
ALWAYS if a blade should bind fast in a cut, shut off
the engine immediately. Push the branch or tree to
ease the bind and free the blade.
BCU04
IMPORTANT!
Safety and Operation Information Labels: Make sure all informa-
tion labels are undamaged and readable. Immediately replace
damaged or missing information labels. A new label is provided
in this kit and additional labels are available from your local
authorized Shindaiwa dealer. Prior to installing the new label,
Remove old label and clean the outer tube with rubbing alcohol
or similar cleaner.
3
Advertisement
